Picture of GC Column OPTIMA-1. 0.10 mm ID. 0.10 µm. 10m 726024.10

Picture of GC Column OPTIMA-1. 0.10 mm ID. 0.10 µm. 10m 726024.10

Picture of GC Column OPTIMA-1. 0.10 mm ID. 0.10 µm. 10m 726024.10

GC Column OPTIMA-1. 0.10 mm ID. 0.10 µm. 10m 726024.10

Capillary column OPTIMA-1 ID: 0.1 mm, film thickness: 0.1 µm length: 10 m, pack of 1

SKU: 726024.10

Manufacturer: Machery Nagel

Features

	Characteristics of fast GC: decreased column diameters, high heating rates and decreased column lengths for faster GC separations with high resolution efficiency; small inner diameters combined with very fast temperature programs can reduce the analysis time by up to 80 %
	High heating rates place special demands on stationary phases: OPTIMA® columns meet exactly this requirement, as they show very low bleeding and provide long lifetimes, even when continuously subjected to high heating rates. Click names in table below for features of individual phases!
	System requirements for fast GC: Small inner diameters result in high column inlet pressures and a lower volume flow of the mobile phase, which as a consequence require very fast injection of very small samples against a high pressure. The amount of sample, which can be injected, is limited by the inner diameter and the thin film. High sensitivity detectors with small volume and extremely short response time, as well as a very rapid data acquisition and processing are required.

Attribute name	Attribute value
Type	GC column
Phase	OPTIMA-1
Diameter	0.1mm
Length	10m
Film thickness	0.10 µm