Machery Nagel

Insert for small opening vials, clear, with plastic spring 0.1 mL 5 x 29 mm

Insert for vials with small opening, clear, conical, 15 mm tip 0.1 mL 5 x 31 mm

Insert for small opening vials, clear, conical, 9 mm tip 0.15 mL 5 x 31 mm 100

Insert for small opening vials, clear, flat bottom 0.25 mL 5 x 31 mm

Insert for vials with wide opening, clear, with plastic spring 0.1 mL 5.7 x 29 mm

0.1 mL Polypropylene Insert for wide opening outer diameter: 5.7 mm, outer height: 29 mm transparent, with integrated spring pack of 100

Insert for vials with wide opening, clear, with plastic spring, silanized 0.1 mL 5.7 x 29 mm

Insert for vials with wide opening, clear, conical, 15 mm tip 0.2 mL 6 x 31 mm

Insert for vials with wide opening, clear, conical, 12 mm tip 0.25 mL 6 x 31 mm

Insert for vials with wide opening, clear, flat bottom 0.3 mL 6 x 31 mm

Insert for vials with wide opening, clear, conical, 15 mm tip, silanized 0.2 mL 6 x 31 mm

Molybdatophosphoric acid spray reagent pack of 100 mL __UN 3316 Chemical kit 9 II 0.100 L ADR/GGVSEB M11 (E) ADR 3.3.1/251: LQ PAX 960 10 Kg CAO 960 10 Kg

Sodium citrate pack of 2.5 g in 100 mL bottle

NUCLEODUR 100-50 C18 ec pack of 100 g in glass container

Nut 1/16" with bore suitable for 1/16" capillary tube pack of 5

Capillary column OPTIMA 1701 MS ID: 0.25 mm, film thickness: 0.25 µm length: 30 m pack of 1

O-ring for VP guard column holder 8 mm (718251) pack of 2

Capillary column PERMABOND FFAP ID: 0.25 mm, film thickness: 0.25 µm length: 10 m

Capillary column PERMABOND Silane ID: 0.32 mm, length: 50 m

N 8 PE plug, transparent, for use with 70202.1 and 702017

N 20 PE cap, transparent, for beveled HS crimp neck N 20, center hole 4.3 mm, height 8.4 mm Butyl beige / PTFE gray, unassembled (separate parts)55° shore A 1.3 mm

N 20 PE cap, transparent, for beveled HS crimp neck N 20, center hole 4.3 mm, height 8.4 mm no liner

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm Natural rubber red-orange / TEF colorless, ready assembled 45° shore A 1.3 mm

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm no liner

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm Butyl beige / PTFE gray, unassembled (separate parts) 55° shore A 1.3 mm 100 each

N 18 PE snap cap, transparent, for use with 70271 and 70272

N 22 PE snap cap, transparent, for use with 702019 and 70273

PEEK standard capillaries OD: 1/16", ID: 0,17 mm, length: 1m

Connector 1/16", PEEK both sides inner threads, complete nuts and double ferrules for 1/16" low dead volume, complete inert biocompatible

Double ferrule 1/16", PEEK

Fingertight fitting 1/16", PEEK 1-part combination nut + ferrule

Fingertight nut 1/16", PEEK

Guillotine Cutter for polymer tubing red, pack of 1

pH test strips, pH‑Fix 0–14, fixed indicator

Plastic Syringe content: 1 mL, with graduation

Polyamide CC 6 particle size: 0,10-0,3 mm, pack of 1000 g in plastic container

POLYGOPREP 60-12 pack of 1000 g in plastic container

POLYGOSIL 60-5 pack of 10 g in glass container

POLYGRAM sheets SIL G size: 2,5 x 7,5 cm pack of 200

Potass. hexacyanoferr(III)sol., 100 mL

Pre-assembled vial-insert combinations with screw neck N 9

Pre-assembled vial-insert combinations with screw neck N 9

Pre-assembled vial-insert combinations with screw neck N 9

Pre-assembled vial-insert combinations with snap ring N 11

Pre-assembled vial-insert combinations with snap ring N 11

1.5 mL Crimp Neck Vial N 11 outer diameter: 11.6 mm, outer height: 32 mm clear, flat bottom, wide opening crimped with 702823: N 11 Aluminium crimp cap, silver, center hole Silicone white/PTFE blue, cross-slit Hardness: 55° shore A Thickness: 1.5 mm pack of 100

Pre-sealed vials 70201HP: 1.5 mL crimp neck vial N 11, 11.6 x 32 mm, clear, flat bottom, wide opening crimped with 702995: N 11 aluminium crimp cap, silver, center hole, PTFE red / Silicone white / PTFE red, 50° shore A, 1.0 mm

Pre-sealed vials 702134: PP Snap Ring Vial N 11 outer diameter: 11.6 mm, outer height: 32 mm transparent, with integrated Glass Insert 0.2 mL, conical crimped with 70256: N 11 Aluminium crimp cap, silver, center hole Natural Rubber/Butyl red-orange/TEF colorless Hardness: 45° shore A Thickness: 1.0 mm pack of 100

Pre-sealed vials 702892: 1.5 mL crimp neck vial N 11, 11.6 x 32 mm, amber, flat bottom, wide opening, label and scale crimped with 70256: N 11 aluminium crimp cap, silver, center hole, Natural rubber / Butyl red-orange / TEF colorless, 45° shore A, 1.0 mm

Pre-sealed vials 702892: 1.5 mL Crimp Neck Vial N 11 outer diameter: 11.6 mm, outer height: 32 mm amber, flat bottom, wide opening, label + scale crimped with 702823: N 11 Aluminium crimp cap, silver, center hole Silicone white/PTFE blue, cross-slit Hardness: 55° shore A Thickness: 1.5 mm pack of 100