Labwater 2 With Hose & Gun L991021

Labwater 2 With Hose coil and dispensing Gun and 2 x D700 cartridges
Availability: 1 in stock
SKU: L991021
Manufacturer: Purite

 

Labwater 2 With Hose & Gun | Product Details

A deioniser suitable for general laboratory applications typically requiring up to 30 litres per day of deionised water. It is a wall mounted product that does not require mains electricity and indicates cartridge exhaustion by the use of colour change resin. Supplied with coil and gun for accurate dispensing. This product is ideal for intermittent use, with a typical output of 320 litres based on a supply containing 200mg/l of total dissolved solids. Supplied with 2 x D700 cartridges.

 

Purite Labwater | Overview

The Purite Labwater dionisation unit produces low volumes of purified water between 1 and 10μS/cm on demand, from a standard laboratory water supply. Connection to a tap or stock-cock is via a simple flexible hose. Fitting is quick and simple.

The colour-change resin indicates when replacement is required. Two versions are available, for flow rates of up to 60 l/hour. Output capacity will vary depending on water hardness; typically, capacity will be up to 1280l for soft water regions.

 

Unit specificationLabwater 1Labwater 2
Width (mm)8080
Depth (mm)100100
Height (mm)580760
Maximum Shipping Weight (kg)*2.84.4
Maximum Working Weight (kg)*2.53.5

 

Installation requirementsLabwater 1Labwater 2
Feed WaterPotablePotable
Maximum TDS (ppm)10001000
Feedwater temperature1-35oC1-35oC

 

Purite Labwater | Technical Specification & Output Capacity

 

Technical specificationLabwater 1Labwater 2
Max. feed pressure (bar)0.5 – 50.5 – 5
Max. feed flow rate (l/hr)3060

 

Output capacity (litres)Labwater 1Labwater 2
@ 50 mg/l tds (soft)6401280
@ 200 mg/l tds (medium-hard)160320
@ 300 mg/l tds (hard)106212
pHNeutralNeutral
Conductivity10 – 1µS/cm10 – 1µS/cm

 

Attribute nameAttribute value
CategoriesDI Units