A deioniser ideal for general laboratory applications which typically require up to 5 litres per day of deionised water. A wall mounted product that does not require mains electricity due to cartridge exhaustion being indicated by colour change resin. This product is ideal for intermittent use, with a typical output of 160 litres based on a supply containing 200mg/l of total dissolved solids. Supplied with 2 x D340 cartridges.
Purite Labwater | Overview
The Purite Labwater dionisation unit produces low volumes of purified water between 1 and 10μS/cm on demand, from a standard laboratory water supply. Connection to a tap or stock-cock is via a simple flexible hose. Fitting is quick and simple.
The colour-change resin indicates when replacement is required. Two versions are available, for flow rates of up to 60 l/hour. Output capacity will vary depending on water hardness; typically, capacity will be up to 1280l for soft water regions.
| Unit specification | Labwater 1 | Labwater 2 |
|---|
| Width (mm) | 80 | 80 |
| Depth (mm) | 100 | 100 |
| Height (mm) | 580 | 760 |
| Maximum Shipping Weight (kg)* | 2.8 | 4.4 |
| Maximum Working Weight (kg)* | 2.5 | 3.5 |
| Installation requirements | Labwater 1 | Labwater 2 |
|---|
| Feed Water | Potable | Potable |
| Maximum TDS (ppm) | 1000 | 1000 |
| Feedwater temperature | 1-35oC | 1-35oC |
Purite Labwater | Technical Specification & Output Capacity
| Technical specification | Labwater 1 | Labwater 2 |
|---|
| Max. feed pressure (bar) | 0.5 – 5 | 0.5 – 5 |
| Max. feed flow rate (l/hr) | 30 | 60 |
| Output capacity (litres) | Labwater 1 | Labwater 2 |
|---|
| @ 50 mg/l tds (soft) | 640 | 1280 |
| @ 200 mg/l tds (medium-hard) | 160 | 320 |
| @ 300 mg/l tds (hard) | 106 | 212 |
| pH | Neutral | Neutral |
| Conductivity | 10 – 1µS/cm | 10 – 1µS/cm |