100% NZ Owned Company

Phone: 0800 1 289 266

Email: sales@microanalytix.co.nz

Home Manufacturer Promotion About Us Catalogue Contact Us

Labwater 2 Deioniser with Dispensing Gun L991020

Lab 2 Deioniser with Spout and 2 x D700 cartridges
SKU: L991020
Manufacturer: Purite
Pack Size: 1

 

Purite Labwater | Overview

The Purite Labwater dionisation unit produces low volumes of purified water between 1 and 10μS/cm on demand, from a standard laboratory water supply. Connection to a tap or stock-cock is via a simple flexible hose. Fitting is quick and simple.

The colour-change resin indicates when replacement is required. Two versions are available, for flow rates of up to 60 l/hour. Output capacity will vary depending on water hardness; typically, capacity will be up to 1280l for soft water regions.

 

Unit specificationLabwater 1Labwater 2
Width (mm)8080
Depth (mm)100100
Height (mm)580760
Maximum Shipping Weight (kg)*2.84.4
Maximum Working Weight (kg)*2.53.5

 

Installation requirementsLabwater 1Labwater 2
Feed WaterPotablePotable
Maximum TDS (ppm)10001000
Feedwater temperature1-35oC1-35oC

 

Purite Labwater | Technical Specification & Output Capacity

 

Technical specificationLabwater 1Labwater 2
Max. feed pressure (bar)0.5 – 50.5 – 5
Max. feed flow rate (l/hr)3060

 

Output capacity (litres)Labwater 1Labwater 2
@ 50 mg/l tds (soft)6401280
@ 200 mg/l tds (medium-hard)160320
@ 300 mg/l tds (hard)106212
pHNeutralNeutral
Conductivity10 – 1µS/cm10 – 1µS/cm

 

 

Further details please check the brochure

Attribute nameAttribute value
Pack Size1
CategoriesDI Units

Information

Customer service

Copyright © 2024 MicroAnalytix-NZ. All rights reserved.
Powered by nopCommerce